home > product details nac model rated voltage [v] rated current [a] nac-06-472 ac 1- 250 / dc250 6 nac-10-472 ac 1- 250 / dc250 10 nac-16-472 ac 1- 250 / dc250 16 nac-20-472 ac 1- 250 / dc250 20 nac-30-472 ac 1- 250 / dc250 30 NAC-04-472 ac 1- 250 / dc250 4 features high attenuation of common mode noise from 150khz to 1mhz single phase 250 vac selectable leakage current quick and easy push-down terminal. just connect the wires, push down and tighten the screws with a screwdriver. din rail installation (option) rohs compliant safety agency approvals ul1283 csa c22.2 no.8 (c-ul) din en133200 vde0565 teil 3-1 enec
i-2 noise filter nac series high-attenuation type of common mode noise from 150khz to 1mhz nac -10 -472 - o ordering information 1 model name 2 rated current 3 line to ground capacitor code:see table 1.1. table1.1 line to ground capacitor code code leakage current (input 125/250v 60hz) line to ground capacitor (nominal value) 681 75.5 a/ 150 a max 680pf 102 0.13ma/ 0.25ma max 1000pf 222 0.25ma/ 0.5 ma max 2200pf 332 0.38ma/ 0.75ma max 3300pf 472 0.5 ma/ 1.0 ma max 4700pf * 1 when the line to ground capacitor code is different, the attenuation characteristic is different. 4 options d :din rail installation type * the dimensions change when the option is set. refer to external view. 1 2 3 4 specifications no. items NAC-04-472 nac-06-472 nac-10-472 nac-16-472 nac-20-472 nac-30-472 1 rated voltage[v] ac 1 f 250 / dc250 2 rated current[a] 4 6 10162030 3 test voltage (terminal-mounting plate) 2,500 vac (cutoff current = 20ma), 1minute at room temperature and humidity 4 isolation resistance (terminal-mounting plate) 500 vdc 100m w minute at room temperature and humidity 5 leakage current 125/250v 60hz 0.5ma/1.0ma max 6 voltage drop 1.0v max 7 safety agency approval temperatures -25 to +85 c (refer to derating curve) 8 operating temperature -40 to +85 c (refer to derating curve) 9 operating humidity 20 to 95%rh (non condensing) 10 storage temperature/humidity -40 to +85 c /20 to 95%rh (non condensing) 11 vibration 10 to 55hz, 19.6m/s 2 (2g), 3min. period, 1hour each x, y and z axis 12 impact 196.1m/s 2 (20g), 11ms once each x, y and z axis 13 safety agency approvals ul1283, csa c22.2 no.8 (c-ul), din en133200 vde0565 teil3-1, enec (at only ac input) 14 case size (without projection) /mass 53 x 41 x 92 mm (w x h x d) /300g max (option : -d refer to external view) features of nac series circuit diagram derating curve line case : mounting plate 1 2 4 3 cy cy cy : line to ground capacitor load high-attenuation type of common mode noise from 150khz to 1mhz - single phase 250 vac - quick and easy push-down terminal just connect the wires, push down and tighten the screws with a screwdriver 90 50 60 70 80 20 0 -40 40 -30 -20 100 80 60 40 55 ambient temperature [ c ] load factor [%] din rail installation type is option the terminal cover is retracted inside the unit
i-6 noise filter nac,nam,nap,nah series mounting plate terminal cover 2-protection earth 6-m4 2- f 4.8 name plate ? tolerance : 1 ? mass : 300g or less ? mounting plate : iron (surface finishing:nickel plating) t=1.0 ? case : pbt ? dimensions in mm ? terminal block screw tighting torque m4:1.6n - m (16.9kgf - cm) max output terminal input terminal output terminal mounting hole input terminal 82 0.5 77 15 45 0.5 (2) 41 53 92 terminal cover ? closed the terminal cover 12 8 27 (2.5) this product is shipped in the following condition, because it is equipped with push-down terminals. 1 the terminal cover is retracted inside the unit. 2 the screws for connecting the terminals are held in the up right position. ? note when installing the noise ? lter on a din rail. when the noise ? lter is grounded through the din rail, the proper noise attenuation may not be achieved. be sure to connect the protection earth (pe) of the noise ? lter body to the earth. 6-m4 name plate output terminal output terminal 7 (9) (11) 92 53 41 (2) 12 15 77 ? tolerance : 1 ? mass : 300g or less ? mounting plate : iron (surface finishing:nickel plating) t=1.0 ? case : pbt ? dimensions in mm ? terminal block screw tighting torque m4:1.6n - m (16.9kgf - cm) max (2.5) 8 27 2-protection earth mounting plate terminal cover din rail input terminal input terminal terminal cover ? closed the terminal cover standard type din rail installation type name plate din rail external view
|